Ear Hook with hooked cap and pin 20mm, silver rhodium plated (4pcs/set)

On the front part of the earring hoop there is an eyelet in which a cap with a pin is hooked. A half-drilled or through-drilled ball can be glued onto the pin and cap. The diameter of the ball must be between 4 and 8mm, the hole must be at least 0.9mm.

Material of Earstuds for gluing in: rhodium-plated silver 925

4 Ear Hook/VE

These bead holders are ideal for recycling leftover single drilled beads!